December 12, 2020
Description
Before we start as you know, these projects take a lot of time and effort. If you'd like to support my work, you can join my YouTube channel or use the Super Thanks button on my videos. Your support helps me create even more exciting and detailed content, and as a member, you’ll get some exclusive perks too!
https://www.youtube.com/@retsetman9698
https://www.youtube.com/watch?v=VQj4Sp7Rxt8
In this project I made a very very strong gearbox. Actually this project is for some fun because it's hard to believe, but if the input shaft rotates at 500 rpm, the last gear will start to rotate after 105 years!
pinion gear 12 teeth and counter gear 61 teeth. so the reduction ratio in each stage is i=5 and there are 15 stage in the system. so total reduction ratio is 5^15= 30,517,578,125:1
Meanwhile you can get the reduction ratio you want in this gearbox. You can use less gear by moving the rod that connects the right and left parts. You don't have to do 15 steps like I did.
Bearings: 608zz
Material: PLA+
Materials
Retsetman Input-OutputShaft x2
Pin x2
Stick x2
InputshaftSpacer x1
OutpuShaftSpacer x1
ShaftFixer x4
RightSide x1
LeftSide x1
12Toothpinion x1
OutputLastGEAR x1
61-12toothgear xWhat ever you want !
License:
Creative Commons - Attribution
