BabyCrocodile GepRC Full DJI air unit

ever wanted to record the full 28 minutes of long range flying with your GepRC Baby Crocodile but can,t carry a gopro/wont gut out a gopro to make naked?
if you are flying DJI FPV, you can now slap an Air Unit in your croc and have the whole flight recorded in 1080 HD!

these are the files i made to transform your (digital/caddx) baby Croc into a full DJI with recording baby croc.. ow and just for the fun of it: it comes with a mount for the Insta360 Go to!

it still uses the stock gps and lost model beeper to!

you need the DJI MMCX to SMA pigtail and DJI sma antennas. (or a generic thin pigtail mmcx-sma and antennas of your own choice (LHCP))

also you might need new screws (shorter) to mount your AIO FC to the frame. it uses the same placement but extra low.

in the pictures you can see that i'm using the frame upside down.. it is not needed to make it full dji, but i just didn't like how close the esc soldering was to the frame/arms.

UPDATE MAY 27

---

-i've made a nose that fits the insta360 Go2 at 15 degrees tilt (Croc nose Go2 V1)
-changed the back a little: beeper bay is slightly longer, AU antennas are slightly further apart and an opening in the gps mount to see the leds on the gps for 3D lock (crockback V10)

---

printing for the different parts:
nose: 45% infill-tree supports- printing with the front of the nose facing up.
air unit holder: 90% infill-tree supports-flat bottom part on the build plate
croc back: 25% infill-tree supports- printed with the backside of the file facing up.
insta360_go_mount: 25% infill-tree supports- laying leftside on the bed.