Timber Hawk MadCat/Timberwolf Stile Walker Legs for a StormHawk Conversion

NOTE: Reference picture of the prototype from Plasticard! Not the printed version.

Summary
From the first version to this latest version, I applied all the lessons learnt, fixed all the bugs, and added a ton more detail.

I will add the weapons options on a later post.

Instructions: The picture is added for reverence. For a full print you will need:

2 x Hips
2 x Legs upper
2 x Knee Joint
2 x Legs lower
2 x Foot
2 x Ankle
4 x Ankle Retention Bolts (The smaller ones)
6 x Upper Retention Bolts
6 x Toe Bridge
6 x Toe
6 x Toe Clamp Left
6 x Toe Clamp Right
1 x Everything else

You also need a Stormtalon kit, and will need to make a cut. I recommend visiting my blog (linked below) to see where and how.

The background to this project:
I wanted an inline leg design, where the upper and lower portions were in line with each other, as opposed to next to each other. I also wanted to change the feet, and lastly, the overall "feel". The height was good, I liked the Timberwolf/ Mad Cat/ Vulture look, and I was fine with the hip design. I also wanted a lot more armour.

And as always, if you want to try it from Styrene, the template and tutorial is here: http://www.captmagpie.co.uk/2018/02/be-vewy-vewy-quiet.html