January 12, 2021
Description
a modification of Team Panic's silicone wheel molds.
use 2-3 drops of glycerine and a drop or two of acrylic paint in 100% silicone with acetic cure. (the really smelly stuff) I do about 6-7 squeezes of the caulk gun per batch and make about 8 tires with that.
mix well and apply to both halves of the mold. press together.
Silicone doesn't stick to PLA so let them set up and remove and trim the tires. these are a stretch fit to the wheels and can be glued to your motor shafts.
License:
Creative Commons - Attribution
1337gallagher
