Bigtreetech TFT35 v3 Display Holder

I like the case design of Hukuma's case. It's simple an elegant, but I like to have a more stable bracket.

I found the Bracket from Whifflesauce and tested it, in my opinion it was harder to print without many support. I managed it but I would like to have a more stable one.

So I got Whiffle's model and reworked the Idea with Fusion. The model is a complete rework from scratch but orientating on the shape and dimensions of its template.

If your printer is good in bridging you may not need any support.

I used some support with PrusaSlicer in the cutout for the wires (on the plate to screw it to 40x40)

You need to print the case from https://www.thingiverse.com/thing:3950607 and use my bracket.

Update Notes

V1:
You need a m5 threadcutter to cutout the required threads. The stock existing threads might not fit.
The tools is and you get at variuos shops.

I may will check for and update on the design to enable the stock mounting.

V2:
Update mount holes to fit the stock holes.
Not printed yet.