Yet Another Air Purifier Block

YET ANOTHER AIR PURIFIER BLOCK

This is a remix of Bobtinguri's Air Purifer.
I made the top easy printable and reduced the top thinkness by 5mm , now it's 10mm thick.
A 30mm fan will fit now and you can screw it from the top. (Long screws required)

The fan mesh has been replaced by a honeycomb pattern.

The top can be printed now up side down and saves a lot of fillament.

I made a remix for the bottom to screw it to a plate if wanted (4mm wood screws).
You can also use the original one if you not need this feature.

Material

Option 30MM Fan

M4x50 Screws

Option 20MM Fan

M4x40 Screws

All:
M4 Nuts

Updates

V2

• Modified the cable cutouts 4mm wider to fit at least 3 cables for fan.
• Added Filter Remix with 4mm wider cutout for cable
• Add more tollerance for screws in bottom remix.

I've not reprint it I used my various types of files to archive more space.
V1 was successfully printed.