Cable tidy for CR-10s

Tis is a cable tidy for the X Axis of the Creality CR-10s.

It has the advantage of having open chain links that have snap in covers. This means that you can fit the cable into it without having to take the 3D printer to pieces!

The only non printable part is an M3 15mm machine screw.

The cold end attaches to the nut where the nylon tube come out of the plastic feed.
The hot end attaches over the plate the rollers are attached to, and is screwed on using the M3 15mm machine screw to replace the shorter screw in the front of the fan cover (a longer one would also work but would not look as neat).

To make the complete unit you need 11 chain links and 1 of each of the hot and cold end parts.

I printed mine in PLA which seems to work fine and is easiest to work with.