Summary

I needed a funnel to fill my custom loop without spilling coolant all over, it has regular G1/4" external thread on its tip, that will fit a fill port or reservoir etc. I made a version with longer 50mm tip, if you need it for extra clearance, also you should print the thread test to make sure your final product will fit nicely, it uses very little material and it can be screwed into the thread with 8mm hex key.

Print Settings

Printer:

BIQU B1

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Read instructions!</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> ERYONE PETG                Transparent Blue                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print the thread test first to see, if you need to use lower resolution than 0,2mm. I highly recommend printing in PETG for better chemical resistance, but i believe PLA will also be fine. Print the thread facing up and use a brim since the funnel has very little contact are to the bed.</p></div>

Water cooling custom loop filling funnel

Water cooling custom loop filling funnel

Related Models