Levelor Blinds Bracket (Cordless, maybe others)

This is a mounting bracket designed to attach Levelor blinds (cordless, possibly others) in either a top mount or rear mount approach. When mine went missing I discovered that it was going to cost $25 and over 2 weeks to get a pair of replacements. Given that I had more time that evening than patience, I took a couple hours to built and test a replacement set.

The bracket tongue fits into the channel on the top of the shade, and the thin "arm" snaps around the base of the blind to hold the rear of the blind. The pictures are definitely worth a thousand words here.

Please note that I printed with a CF PETG largely for its higher temperature allowance, so if you use a more conventional filament be aware that the bracket may come in direct contact with sunlight and thus you should be careful that the bracket not heat up and loosen its grip on your blind.