Playstation/ Xbox LED Light

Update 01/08/2023:

• Added an Xbox-themed socket.
• redesigned ps_logo_resin & ps_logo_socket due to some 3D Model issues with the
• 3DCAD-Files
• reduced the file size of ps_logo_resin
• new names:
  • ps_logo_resin_v2
  • ps_logo_socket_v2

---

Hello Guys!

This is my version of a Logo for my Playstation 5 as a light with a stand.

The original design was created by Christopher Quinalty: https://www.thingiverse.com/cq842000/designs

I tried printing his design of his Sony Play Bust with an Elegoo Mars 2 Pro. After the 3rd attempt i gave up on it.

I had to scale it down a little bit but still couldn't get a good result based on the hollow design. The walls ended up being only 0.4mm thick. Therefore, if you touch it a little too rought it will break, as it did for me.

So, I decided to re-design it a bit.
After I finished the Logo I was like yea, why not making it shine even more!

I bought a 30 LED/1m 5V with remote LED-strip for 10$ on Amazon and designed a socket with Playstation on the front.
(For Xbox don't worry, I've uploaded a clean socket as well for you guys!)

With the 30 LED/1m you can fit up to 10 LED's around the socket as you can see down below in this post.

I fixed the strip inside and the cable which goes out of the socket with some hot glue. You know, just in case.
After glueing everything together, I coated it with some clear varnish.

I hope you enjoy it and please support the original designer as well!