Summary

I liked the original See.sense Ace Searpost mount that I saw here on Thingiverse, and that the See Sense Ace fit snugly where it was not going to easily fall out. I decided that I wanted to be able to take the mount off my bike, but wanted to leave the Ace in the mount and still be able to charge—only removing the O-ring to take it off the bike. With my Ender 3 pro, I did have to adjust the final by increasing the size 1% so that it would click into and out of the mount easier. Also, better with PETG, though PLA worked--I was just afraid of it being brittle after a while.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>200</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                    <strong>Filament:</strong> Genaric PETG                Clear                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>On my Ender 3 Pro, it printed better with a 1% scale increase.  Also, make sure to print with the part that goes against the bike frame down.</p></div>

How I Designed This

I modified the original See.sense Ace Searpost mount using Tinkercad by separating the front and back sections into 2 pieces. I slid the back part down to be even with the bottom stop, This moved the back mounting area out of the way to be able to open a rectangular area wide enough to allow manipulation of the rubber cap that protects the micro USB port.

See.sense Ace seatpost mount with power pass through

See.sense Ace seatpost mount with power pass through

Related Models