Covid 19 Vaccination Multipass Holder (Individual pieces)

The version of this that this was based on (by level2three) is AWESOME, but I wanted to do a multi-color version (and I don't have a multi-material printer), so I split up the individual pieces so I could print them with different filaments.

For the domed round button, I decided to make it from scratch so it would be higher resolution. (See my notes below in the "post-printing" section for more details on this, and what the "Optional_Button_Standoff" is for. Note that the "Optional_Button_Standoff" is NOT part of the Multipass itself).

I also didn't like the added stopper on the end, so I added a little "bump" to the end of the holder so that the card will be held in. (It is not meant to be rugged, so note that though it will hold your card in tightly, it probably won't hold on to the card if you do a lot of flexing of the holder..) This does not provide any sort of protection for your vaccine card, and is meant for decoration purposes only.

I used different PLA filaments (including an iron-filled on for the base pieces so that they are actually magnetic...which I had a bit of trouble with, which is why the body looks a bit rough...my apologies), but you should be able to print it with whichever filaments you want.

(I use the hole that was originally for a lanyard as an easier way to pop out the vaccination card, so it is covered up by the card...if you want that hole outside of the card, I've created elongated versions of the top and bottom parts of the body so that that hole is further away from the card. If you want that, download the longer body pieces from here and use them instead: https://www.thingiverse.com/thing:4870672)

Thanks to level2three for the awesome vaccine card adaptation which this is split from, Jurgizmo for the model that that model was based on (https://www.thingiverse.com/thing:491108), and Imirnman for the original model! (https://www.thingiverse.com/thing:397005)

(It looks like level2three has moved off Thingiverse and to the Prusaprinters site, so if you want to see the version this is based off of, go there! https://www.prusaprinters.org/prints/67610-vaccination-multipass-holder)