E3D V6 hotend easy maintenance carriage for Felix 3D printer

After lot of requests, I’ve updated the E3D V5 hot end carriage to the E3D V6 Hot end.
The hot end clamp is completely redesigned, but the baseplate and fan duct are the same. So if you upgrade from the V5, you only have to print the “cooler base” and “cooler door”
This hot-end carriage makes the bowden tube E3D hot-end V6 ( http://e3d-online.com/ ) compatible with the Felix 3D printer (1.5 and up). It's designed for the felix Printer, but can easily be adjusted for other printers as well. Just fit it with two bolds against the rails.
The hot-end can easily be removed by unscrewing 2 bolds and opening the door.
It’s specifically design for the V6 version, The v5 or if a newer version comes up with a new layout cool-ribs, it will not fit. The cool ribs are printed inside the PLA clamp.
If you need a V5 version: http://www.thingiverse.com/thing:159142
It uses 40mm fans (not the E3D supplied 30mm fan) More cooling, less noise. (and comes standard with the Felix printer)
This is a two part design. The other part is the Bowden feeder:
http://www.thingiverse.com/thing:159159
Here's a instructional video of the (V5) carriage and bowden feeder in use:
http://www.youtube.com/watch?v=ZsNm0UfQsyQ
Special thanks to Guillaume from Felix printers to supply the rail-base.
If you use it, please share a picture!