Helmet Wall Stand

I designed this stand for my racing helmet. It attaches to the wall with 2 wood screws into a stud.

I used 6 sets of M4x20mm socket head screws with nuts and washers to hold everything together.

My Print Infill and Layer Settings:

0.4mm Nozzle with 0.32 Layer Height

BASE:

Infill - Grid 50%
Walls - 5
Top and Bottom Layers - 5
Support - No

ARMS:

Infill - Grid 50%
Walls - 5
Top and Bottom Layers - 4
Support - Yes (Needs support on one end)

TOP HAT:

Infill - Grid 20%
Walls - 3
Top Layers - 3
Bottom Layer - 6 (Make sure tab with holes is completely solid)
Support - No