GoPro to tripod adapter

This simple adapter allows any camera or smartphone mount to be attached to a GoPro camera mount.

For mounting, 4 M2.5x12mm screws, 8 washers and 1 1/4-inch hex head screw are required. This screw will need to be cut to the proper length, depending on which device is to be attached. In the case of using it with cameras, it should not protrude from the base by more than 7mm.

The washers serve as a separator between the two pieces in such a way that they allow the wheel that holds the screw to rotate freely.

To make the set robust, I have printed it in PLA +, with a layer height of 0.1mm and a fill density of 90%. This will also allow the GoPro Dual Coupler to be sanded into a smooth fit.

You can download more 3D models from my website: https://fbueno.net

If you like my designs, you can invite me to have a coffee: https://paypal.me/fbuenonet