Adapter for Festool to Kärcher (TS55, K120 ....)

This adapter is to fit the original Kärcher vakuum to Festool tools / machines.
It is designed to use the locking mechanism of both brands.
Reason is that with other designs the hose can get loose and fall off.
There is very little restriction in airflow I would say. No hard edges whatsoever.

In my case I adapt a Kärcher WD4 premium to Festool KS120 and TS55. But it should work for other models too.

This design is not made to use as less material as possible, because the adapter needs some strength.I´m using it since 5 month without issues. Maybe you could reduce the thickness a bit, but I would leave it as it is.

If you are super happy with what i provide for free, it would be super nice if you would leave me a tip. On the road to a working product I go through quite some material. It would just help me out a bit.
Falls dir meine Konstruktion hilft und du damit zufrieden bist, wäre ich sehr dankbar für ein kleines Trinkgeld.Beim Erstellen einer funktionierenden Konstruktionen geht auch einiges an Material drauf..

I printed it on a Artillery Sidewinder X1 with
210°C Nozzle, 70°C Bed, 40m/s, Sliced via Cura, PLA, 0,4mm Nozzle