June 4, 2021
Description
I wanted a vent mount for my Phone holder that doesn't wiggle around so much. So I designed one that perfectly fits the vent slots in my car.
I have a '97 Volkswagen Polo 6N1.
The mount has a hole in the centre for a screw. In that way you can connect anything to the mount you want. I used a combination of two Car Phone Holders.
-> This is the main phone holder (https://www.amazon.de/UGREEN-Autohalterung-Handyhalterung-L%C3%BCftungsschlitz-kompatibel/dp/B07F3X8PXZ?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ugreen+handyhalterung+auto&qid=1622820709&sr=8-4&linkCode=sl1&tag=meinerasenkante-21&linkId=ee788a41ca7b2800dd4406a612375bce&language=de_DE&ref_=as_li_ss_tl), since it had no ball joint, I combined it with an older mount which had a ball joint on it. I would recommend you try out these ball joints created by DieZopfe (https://www.thingiverse.com/thing:4739696).
After printing you can just clip it between the vent slots.
License:
Creative Commons - Attribution
MakeLikeMike
