June 12, 2021
Description
A 3D printable straight edge band saw guide for a 9in Porter Cable Band Saw.
(Might work with other brands)
All parts should be oriented correctly for printing. I suggest using 15-20% infill with 1.2mm top/bottom and walls.
The Connector Shaft will need to be printed with support.
The Main Shaft Bolt may need a little deburring to turn smoothly in the unthreaded guide.
The Connector Shaft will need to be glued/epoxied to the Main Shaft Bolt.
License:
Creative Commons - Attribution
Anglesmith_Customs
