Summary

After setting up the pool, I noticed that the inlet was pushing the water stream up out of the water surface because the hose was hanging down due to its own weight. The same effect occurred with the outlet. Therefore, I designed a stabilizer for both, so that the hoses arrive straight at the pool wall. This also relieves the pool liner.

Very easy to print, but because of the cavities always with support. As infill I chose only 25%. I used PETG from Extrudr. I would always choose PETG because PLA deforms too quickly in the sun. BDP would certainly work as well.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,25mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25</p></div></p>                                                    <strong>Filament:</strong> Extrudr PETG                black

INTEX Pool Hose Stabilizer 32mm (Intex Schlauchstabilisierung)

INTEX Pool Hose Stabilizer 32mm (Intex Schlauchstabilisierung)

Related Models