Cockerill industrial shunting locomotive HO scale 1:87

Cockerill industrial shunting locomotive in HO scale 1:87 :

This locomotive resembles the SNCB / NMBS 's 91 but is the version intended for industrial use (they differed differs from those locomotives in a few ways such as the placement of the doors or the size and placement of the tanks), These locomotives where built in the 1960s and used throughout Belgium.

This model was deisgned with FDM printing in mind but you might have better results with an SLA printer. If printed on an FDM printer, you will need a 0.25mm nozzle (or finer) and layer heights of 0.05mm.

all of the parts should fit together easily and only need a small amount of glue, The model uses two alignment blocks to make sure it remains square.

You will have to print every part once except for the lights (in 3 parts) and the buffers that have to be printed 4 times.