July 19, 2021
Description
Lattice frame to mount a BTT SKR Mini E3 V2 controller in the Wanhao i3 Plus. No need to rewire everything to the hot-end, You can continue to use the stock ribbon cable. All that is needed is to buy a second ribbon cable breakout board and use that inside the base to convert the ribbon back into standard connectors. The breakout board is available from several sources online, but I use the Ultimate 3D Printing Store.
The metal L brace that that separates the Y axis belt from the Melzi control board can either be removed, or in my case I re-drilled it to move the brace closer to the belt to make room for the lattice frame and the BTT SKR controller.
The lattice frame will hold the following
• BigtreeTech SKR Mini E3 V2 controller (or equivalent)
• Mosfet for bed power
• Wanhao I3 Plus ribbon cable breakout board
• 4020 or 5015 blower fan
• Micro to standard SD card reader
• Micro USB to female USB cable
License:
Creative Commons - Attribution
mediaman
