Faucet base socket wrench 24 & 28 mm * 115mm

I created this faucet base wrench to be able to mount my WC corner faucet.
The space is really small and a normal faucet wrench does not fit.
This pipe wrench is 11.5 cm long and enabled me to extend the 28 mm base nut enough to get a good grip with my hands.
Additionally I designed an insert for the pipe wrench to also be able to mount the 24 mm water hose nut, which turned out to be unreachable with normal wrenches.

Print instructions:
Printed in Devil Design PETG Black

Print speed 100mm/s
Layer height 0.3 mm
Perimeters 4 (using 0.7 mm wide perimeters) (basically as solid as possible with perimeters)
Infill 20%
Supports no
Brim yes
Top and bottom infill 1.2 mm