APEX-5 insta360 GO2 mount

Designed up this Insta360 GO2 mound for Apex-5 drone frame.
To assemble you need:

• 4x M3 16mm bolt (2 for replacing original front bolts)
• 2x M3 nut
• 1x 5mm zip tie
• Sponge for better fixation of the camera (put inside of mount)

I used transparent PETG filament with the following settings:

Nozzle: 0.4mm
Layer high: 0.15mm
Infill: 50%
Temperature: 230°C
Cooling: enable
Support: enable (tree)