Stand for BRAUN Trimmer (ex. BT3222)

This is a stand for BRAUN trimmer (ex. bt3222). I tested with BT3222.
To stabilize the stand, I made a dent so that a weight can be attached to the bottom. I used the M12 washer as a weight and glued it together.

[print conditions]
support: no
brim: no
raft: don't matter
filament: PLA

[revisions]
2021/10/19(v2)
The hole on the bottom was enlarged to a diameter of 10.5 mm. (trimmer_stand_v2.stl)
I also designed an additional ring ("bottom_ring.stl") that allows the power connector to be plugged in from the bottom and glued.