August 25, 2021
Description
This is the printed part of wheel free-spinning lock I created for my tractor using Infento.
Best print orientation as in STL.
Other material:
5x M6x25 DIN912
7x M6x20 DIN912
12x M6 locknut
2x M6 washer
2x bearing 626ZZ
Print resolution: 0.28mm on all, 0.2mm on shaft (for the best sliding effect it's best if the shaft and Clutch have different layer heights)
Infill: 30% is enough
Printed in PETG, but PLA should be also possible
Supports: touching build plate
License:
Creative Commons - Attribution
Michal_G
