Mars Orbiter - dual 5015s - Multiple hotend compatibility (ender3/pro/v2)

My latest dual 5015 is called the ApolloLander
Can be found on my https://patreon.com/squirrelf3d
And pics on my https://instagram.com/squirrelf3d
And my newer stuff is on printables: https://printables.com/@squirrelf3d

---

##Mars Orbiter (Alpha and Beta version here)

--

#Final release is done

Thanks to initial support some of the final Mars Orbiter shroud has been made free:
###https://www.thingiverse.com/thing:5182045

This has taken me many hours of many days, so I'm putting the final version for sale.
You can support me on patreon where you'll have access to all the files and other perks (with enough patreon support all files will be made free)
https://www.patreon.com/squirrelf3d

Or a one time purchase:
https://cults3d.com/en/3d-model/tool/mars-orbiter-final-version-ender3-pro-v2-cr10-microswiss-dd-hotend-stock-dragon-dragonfly

**Sturdier design (no sagging on the right side thanks to a second printed part), larger cable route large enough to pass small fan plug through, CR-Touch mount, 12mm and 18mm probe, better view on the hotend (left right fan duct instead of 180degree), microswiss Direct drive support, more hotend supported **

if you don't want to sign up to that website, you can "buy me a coffee" here and I'll send you the files.

---

Please consider donating if you find it useful or want to support me - THANK YOU!! (use the buy me a coffee or the "Tip Designer" button)

---

#Beta release ( aka second release, tested and works great, just needs a few tweaks and will keep tweaking this over time, but great as is already )

####compatibility: ender3/pro/v2 & microswiss
This is the rebuilt version from scratch using what I learned from making the ALPHA version, better cable management, looks are generally roughly similar, but still quite different (so will leave the ALPHA here just in case, but consider the BETA better).
Make sure your bridging is at least decent before printing (super slicer has a flow calibration included to get best results )
** make sure your bed is clean and has good adhesion **

Features:

• no print support needed, design with that as a priority (which is why looks have gothic arch styles)
• no loss of printing volume in X or Y (and technically not in Z either, but standard cable will get in the way eventually)
• Dual 5015 (reason for this design)
• Multiple Direct drive options (and of course Bowden setup) - target design is orbiter since that’s what I use - see below for more info
• multiple hotend and printer version compatibility (check list further below, target design is for the Dragon hotend since that’s what I use)
• 180degree duct output (still unsure if that is a good idea or not, but air flow is contained, and feels like a column of air coming down )
• ADXL345 accelerometer integrated mount (for klipper input shaper) - see below for more info
• bltouch on the right (not really a feature, but a needed design choice due to space restriction on the left side with the X motor in the way), does allow for better cable management, CR touch compatibility coming soon - make sure to update your offset and mesh min,max - see below for more info.
• cable management (cable conduit are too small for fans with plugs, but you can just avoid them and wire things from the front, or the way it is currently setup route cables without plugs, and quick soldering later after its mounted for a very clean setup )
• 2 or 3 point mount seems weak, but it is actually very sturdy (but will maybe figure out an extra mounting point later on the right side, I have a couple ideas)