Summary

Leveling tool for 58.5 mm portafilter baskets, should fit most "58 mm" systems (e.g. E61, but I do not have one, so cannot check).

Height is adjustable by screwing the handle. The thread has 1.5 mm pitch, and the handle snaps every 24 degrees = 15 positions per revolution = 0.1 mm height.

Tool surface should be sanded in order to remove print layer steps (which otherwise "collect" clusters of coffee powder).

Please use PETG which is food safe, or apply some food safe coating to the tool surface.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.12 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20 %</p></div></p>                                                    <strong>Filament:</strong> Eryone PETG                black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><ul><li>Consider that tool surface is getting in contact with coffee powder and so should be food safe</li><li>Reduce layer steps on tool surface (fine layer height, sanding, ...) to avoid accumulation of clusters of powder during use</li><li>Print both parts upside-down<ul><li>Even the tool part can be printed w/o support if you make sure to use straight lines for bottom surfaces so the center hole is closed by bridging</li></ul></li></ul></div>

Coffee Distributor Espresso Leveling Tool 58 (58.5) mm, adjustable height

Coffee Distributor Espresso Leveling Tool 58 (58.5) mm, adjustable height

Related Models