FETtec Spike Absorber 20x20 Mount

These mounts fit on 20x20 stacks with M3 stack screws.

Version 1 (Horizontal): Fits the FETtec spike absorber into the slot flat, the capacitor would go on top. Has two holes for zip tie.

Version 2 (Vertical): The capacitor (I used a 35V 1000uF cap with a 10.15mm diameter) is attached to the FETtec spike absorber with a piece of double sided tape and fits into the slots sideways to save a bit of height in your build. Has two holes for zip tie.

Version 2 (Vertical): As above but with larger cutouts on the side and no zip tie holes