Locksport Lishi Cutter Jig for SC1 Schlage Keyway

This is a collection of jigs that can be used with the Lishi Cutter Tool to make a key from a key blank by key code.

KNOWN ISSUES:

• The key still does not fit into the jig perfectly and results in an incorrect depth cut. The “rails” can be cut off using a knife to make this print usable, but it’s not perfect yet. See video below for an explanation of the current issue and the workaround.

https://youtu.be/1nhw0oLFJ-0

Update v1.1:

• The keyblank should fit better in the jig, the alignment guide was a little too tight and is now 0.15mm less tight.
• The lid for the box has been fixed and now should now fit on the box.
• An arrow with the direction the key should be placed in the jig has been added, which replace the dotted numbers which did not print well.

Some locks that may use the SC1 key:

• Adams Rite
• ADM
• Anderson Window
• Baldwin
• Belnap Hardware
• Brinks
• Carmel Steel Products
• CES
• Donner
• Dorn
• Fortress
• Marks
• Moss
• Olympus
• Packer
• Parker
• PDQ
• Pittco
• Safe
• Schlage
• U.S. Lock
• Unison
• Visa
• XL Lock

The box and lid parts were derived from txoof's project "Introduction to Parametric Customization" which can be found here: https://www.thingiverse.com/thing:1201466