Twist fit tube extenders for monkeemods/colonel wasp firefly

These are twist fit mag caps for the colonel wasp firefly to easily change the amount of shells you can hold in the tube.
Designed to be used with the short shell mod designed by Blue icarian wings
https://www.thingiverse.com/thing:4964955
https://www.thingiverse.com/thing:5138599 (remix for the monkeemods version I'm using, very nice remix by mw597)

and the scar designed by trianglefabrications, fits inside the barrelholder for extra protection:
https://www.thingiverse.com/thing:4790142
(might also work with other scars of similar outer diameter, but havent tested them. You could also remix it for another scar of course)

With the longest tube it will fit 10 short shells. Will probably also be compatible with long shells, but havent tested those.

Other parts i would recommend using with this:

Improved mag follower:
https://www.thingiverse.com/thing:4392093
(Gives just that extra bit of space in the tube)

Nice trigger add-on:
https://www.thingiverse.com/thing:4987216

Bigger shell ejector makes the short shells much more reliable:
https://www.thingiverse.com/thing:5122903

Just very nice pumpgrip:
https://www.thingiverse.com/thing:4521765

Print the barrel end with a bit of infill so it wont break easily, like 30/40% Same for the tube. Barrel needs support, tube might not need it, but i have printed it with supports.
Tolerances are pretty thight, but there is a retaining clip if your tolerances arent as good.
The holes in the smaller tubes are to get enough torque to click them in and out by inserting a screwdriver.

Ignore the dots on the tubes in the pictures, was still dialing in my second printer.