Tamiya Arocs 3363 or Actros Seat Bracket with MFC

I wanted to use the Tamiya MFC-03 and use the interior dash and seat for my Tamiya AROCS 3363. I am sure it will work on the ACTROS. I got this idea from Bob at Hobbyconcepts-LLC video were he made this bracket out of aluminum. This works great and will sit on top of your MFC over the light plug in area, refer to pictures. It bolts to the dash just like the stock seat bracket. You will need to trim the seat to allow the seat to sit as low as possible. The lower dash addon will not be used and you will need to trim the dash area under the cup holder area is to clear the MFC. Other info, the speaker "Beier LS-4R" is mounted in the ceiling facing down using a 3d file found on thingiverse. I am also trying to make a tray to cover the MFC and wires to help clean up the interior.

I find if you print these on there side, the quality of the finish is better and they print faster. They do require support for the mounting hole.

Updated 02/20/2022
Changes

1. Driver seat mounting box was moved closer to steering wheel.
2. The mounting hole is thicker because I found it was weak.
3. Under the the driver, I made the mount thinner to add more clearance.

Bobs Sites
https://hobbyconcepts.net/
https://www.youtube.com/c/HobbyconceptsLLC