Portaberry Pi Ultra Boosted

This is just a minor alteration of 3Derp's "Portaberry Pi Ultra (Portable Rpi Game Emulator)"

I've been looking to build one of these with a Pi 4 for quite a while, but I'm a little worried that the Powerboost1000c won't be able to handle the current draw. On top of that, I also want to modify the batteries to be hot-swappable which the 1000c can't do. So I modified the enclosure to fit an AmpRipper 3000.

Only three components are altered from the original design. (Front Housing, Screen Bracket, and Frame) In addition to changing the hole layout, I also made it so both the AmpRipper and the tpa2016d2 are fixed to the screen bracket using plastic tapping screws instead of mounting foam. You could still probably use mounting foam, I just think these screws are great for 3D prints.

Hardware:

• qty: 1 AmpRipper 3000: https://www.tindie.com/products/kickstart_design/ampripper-3000-5v-3a-lipo-battery-charger/
• qty: 2 Thread-Forming Screw 1/2": https://www.mcmaster.com/96001A160/
• qty: 3 Thread-Forming Screw 1/4": https://www.mcmaster.com/96001A152/