Check out my other designs for the lab: [Cochrane lab designs](https://www.thingiverse.com/zefram_cochrane/collections/cochranes-lab "Cochrane lab designs").
I would be very happy about a [Tip](https://www.paypal.com/donate?hosted_button_id=33A3BXW43NW42 "Tip").
Simple but very useful mixing plate with spade for viscous two-component adhesives.
Both parts are optimized for fast and cheap printing to meet a single use.
The mixing plate has a slight elevation on three sides so that not everything runs down immediately. One side of the plate is open to better wipe off residues. The spatula is stable enough to be able to mix a little more vigorously. The tip is rounded, the rest sharp-edged.
I was tired at some point always to fish matches and plastic scraps from the trash to mix the two-component adhesive. So it is much more convenient.
I used:
YoYi PETG
https://www.amazon.de/Filament-Schwarz-ERYONE-3D-Drucker-3D-Stift/dp/B07XRK9K7Q?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=25XY1BB3IIY3G&dchild=1&keywords=petg+eryone+schwarz&qid=1619684319&sprefix=petg+er,aps,178&sr=8-5&linkCode=sl1&tag=sciencefeles-21&linkId=f425ac85d2f9db36c067ecdad55df3f6&language=de_DE&ref_=as_li_ss_tl
JB Weld
https://www.amazon.de/Filament-Schwarz-ERYONE-3D-Drucker-3D-Stift/dp/B07XRK9K7Q?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=25XY1BB3IIY3G&dchild=1&keywords=petg+eryone+schwarz&qid=1619684319&sprefix=petg+er,aps,178&sr=8-5&linkCode=sl1&tag=sciencefeles-21&linkId=f425ac85d2f9db36c067ecdad55df3f6&language=de_DE&ref_=as_li_ss_tl
'These are Amazon Affiliate Links
Visit my website for more information: [www.science-feles.de](https://science-feles.de "www.science-feles.de").
> ---------------------------------------------------------
> Ceterum censeo martem esse abeundum.
> ---------------------------------------------------------
Zefram_Cochrane
