March 17, 2022
Description
Minimal laundry-rack raiser for vacuum robots.
Fits racks with 16mm tubing. Snap-fit without play. Wide footing. Still allows the rack to fold completely.
Raises the rack by 20mm, just enough to trigger the front bumper of most vacuum robots.
Measure the height of the front bumper from the floor: anything with 15mm or less will work.
Tested with a Lefant M201/M210, Roborock S6/S7.
Print 4x copies, preferring (in order), TPU, ABS or PETG (some flex required).
PLA will likely crack during insertion.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
wavexx
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord) preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/thumbs/cover/320x240/jpg/rl-20240819-012.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg "#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord) preview image")
