Simple Tray Corners

Tray Corners Print List 2 x 30x60x60mm Left 2 x 30x60x60mm Right or 2 x 30x60x90mm Left 2 x 30x60x90mm Right Save money! These are corners that can be used to make trays, or boxes, that hold 28mm miniatures. [Or anything really depending how large you make them with the chipboard.] I like storing minis standing in trays, stacked in totes. These plus 50 pt. chipboard sheets will make stackable trays. Chipboard is available at most art supply or department store stationary sections. Add a lid if you need a box. I would use polyurethane glue or contact cement. (Read instructions for maximum hold. The glue needs to set up before assembly for maximum hold.) These can be used for RPGs, table top miniatures games, dioramas, or photography scenes. The sky is not a limit. More info: 50 pt. chipboard is .050" or 1.27mm thick. To Assemble: Slide bottom in corners but do not glue. Flip on Side. Glue side. Flip on other side and glue, and repeat, until all 4 sides are connected. I don't plan on gluing the bottom. If you want to glue bottom, glue in bottom after 3 sides are glued first. This will allow for adjustments to be made. It will be too late if you wait until after all 4 are glued. :) Can be used for games like Pulp Alley, Alternity's Edge, 5 Parsecs From Home, Killwager, Cyberpunk, Stargrave, This is Not a Test, Zona Alpha etc.