Quest Velomobil Mirrorcone

This is a high resolution Mirrorcone for the Quest Sidemirrors.

For printing with PLA or PETG you can stick 100% size - if you use ABS i recommend increasing the size to 100,83% cause of shrinkage.

For mounting simply unscrew the mirror, stick the shaft trough the cone and use adhesive to hold the cone in place (be sure to have a clean and slightly sanded surface for better bonding). After the cone sticks to the mirror mount and adjust the mirror again.

Disclaimer: This is my own creation. Its NOT a copy of velomobiel.nl design - instead i got inspired by it. I used my own measurements. This file is NOT for selling purpose.