Coin Generator, Looping Louie or 1EUR as example

Hi, unfortunately I no longer publish designs on Thingiverse.
But feel free to have a look at my profile at Printabled.com: https://www.printables.com/de/social/335893-starwhooper/about

There I will continue to maintain my designs and also publish completely new ones.
I have also published several of my designs there in file format for OpenSCAD. This allows you to adapt them better to your personal needs.

---

#Why another design
First of all thanks to Ruvy for his design. But unfortunately I had to realize that the diameter and thickness of his design did not correspond to the dimensions of my Looping Louie game.

That's why I created my own design using OpenSCAD, which takes the more exact dimensions into account.
When I was done with that, I adjusted the design to be able to design coins of any size.
The design comes standard with the Looping Louie coin. The attached JSON file also contains the template for a 1 euro coin, among other things.

#Parameter hb_li:
The parameter applies more material to the bottom of the coin. This surcharge is intended for more material to adhere to the heatbed.
As an an example:
You want a 1mm thick coin. However, your printer is set in such a way that the Z axis is set 0.15mm "lower" for better adhesion. With the value hb_li you can take this into account without the coin becoming flatter.