June 15, 2022
Description
I was using this to fix a peg board to a wall without drilling but it seems that the amount required to affix is quite large for when your weight is much higher. If you plan on using this to mount to the wall use more than 20 and you should only really be using it for things such as art supplies if you are doing a large peg board. My biggest recommendation is to use this to mount things to the board instead! Double sided tape and things like small white boards and such could be attached to a peg board with it.
The tip of the nipple is 7mm wide. This is made for the weaker stuff to be able to deform which ensures it will not slide off easily. It will take some force pushing it through, make sure you screw back and forth trying to push it through, and do not apply much force, it really isn't necessary. Below the tip of the nipple is 6mm for the 5.7mm board hole. You will want quite a few.
Update: If this is your only option you will need a lot of these. I would say around 20 are necessary if you plan on putting on a good amount of weight. I would not mount something like a drill on this though. The more weight, the more mounts. If your paint is crap like mine you will tear it off the wall so keep in mind a path of removing it from the wall.
You need some infill (I tried it without, it will just crumble). For me 15% did well, but feel free to try and adjust. Filament is anything you want. PLA works just fine (but I do think its a better idea to make it denser and with a better material because the tips tend to break).
License:
Creative Commons - Attribution - Non-Commercial
Pneum
