Airtag mount for MTB or other bike with ~34mm hole.

Plug for hiding an Airtag in the steer tube of your fork, fits Ø34mm steer tube.

***

Choose Bottom_lid with or without flange.

*** Now with oversized sqeeze-ring available! If you find fitting too loose i your fork hole, try one of the oversized sqeeze-rigs: ..oversize1mm or ..oversize2mm Add a m5 nut and a 15mm long countersunk m5 screw. Mount the pieces together, sqeeze-ring in the middle, align drainage opening with sqeeze ring. Thread in the screw. 1. Click in your Airtag 2. Push it up from downwards into the steer tube. 3. Make sure the drainage opening is aligned toward to lowest point! 4. Tighten the screw to expand the sqeeze-ring and of you go! To remove it, just loosen the screw and pull in out of the fork! To remove the airtag from the holder, use a longer screw to push it out