August 28, 2022
Description
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of my Smart Grinder Pro. The ones I have tried are too tall so I had to tilt the PF forward a little just so it goes through the cradle slot to reach the on/off activation switch, and the bottom spout hits the grinder tray. So I made my own funnel from scratch in fusion 360, though inspired by other's design like DogsBollocks and DrawnToDigital.
I used clear PETG at 20% infill so the infill lines are visible as shown in the photos.
PETG is preferred over PLA for food safety.
0.4 nozzle
0.2 Layer height
Supports: Yes
Place bottom side up in the bed for cleaner prints.
step file added for tweaking.
License:
Creative Commons - Attribution
Will-i-am
