Flightline OV-10 Bronco Spinner

I made this spinner to fit a Master Air Screw 11x7 propeller. It uses the same center screw mounting system as the stock spinner assembly, so it will fit on the stock power system.

The overall performance with the 11x7 prop isn't anything better than the stock setup, but at least the blade diameter looks closer to what is on the real life aircraft.

P.S. Unlike the stock backplate, this one I made is flat, so it can accept various kinds of props. The stock spinner backplate was molded specifically for the stock prop and wouldn't really accept anything else. My design allows for much more flexibility in prop selection.

---

I want to help out other hobbyists, so I don't charge for my designs. However, if you like my designs and found this helpful, a tip is always appreciated. Tips can be sent to: http://paypal.me/sukotto88