LTT Screwdriver "shortie" Bit Holder 60/48/36/24/12 V6.3

** FOR 20MM DRIVER BITS. WILL NOT FIT STANDARD SIZED DRIVER BITS**

A box I designed to store the extra 20mm driver bits for the LTT screwdriver from lttstore.com. There are 60, 48, 36, 24, and 12 bit variants, and I made two variants of the 36 bit box to give a little more flexibility for size in that middle ground. Was designed for up to 60 bits as LTT currently has 6 different sets of 12 bits, so you can fit up to 5 sets in the case with the 6th in the driver handle. If you are looking to store one of each bit LTT offers currently, a 48 bit case is the size you will want

To assemble, use 4 M220 for the back hinge and the lower latch catch, and 2 M320 screws for the latch hinges.

I have a file with all the pieces in it for illustration, but I wouldn't recommend printing it all together as the latches sometimes pop off the build plate mid print.

DISCLAIMER

I have only printed the 64 and 48 bit versions for myself, so if there are any issues noticed with the smaller cases please feel free to comment/dm me and ill do my best to rectify them. All my modeling has been done in Tinkercad. THIS WAS PRINTED IN PLA. Using other plastic types I cant say if the shrinkage when cooled will interfere with fitment