TBS Source One V5 caddx dji / walksnail / elrs HD antenna holder

Most ELRS24 (tested with Happymodel and Flywoo antennas) and the current caddx vista antenna fit into this mount. The Walksnail antenna is exactly the same as the vista antenna.

I'll upload pictures of the new mount later.
The new version protects the antenna better.
In addition, the new version is stiffer due to the thick shaft, which means that there are no vibrations / resonances. The mount has been optimized using black box logs to be as thick as needed.

I also put about 4mm antenna tubes in the holder for the ELRS antenna. But that is not necessary.
The ufl connector fits snugly through the channel so no cutting is necessary. If there is too much stringing in the channel I would redrill that one with a 3mm drill.

I printed it with TPU 95A and 4 wall thicknesses.