PhLAsk

My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J_TeOsF4M_F5pPPJQ In the quest for 3D printed liquid containers, the okay just got okay-er! While working on a different project, I needed to make a part that fit to a disposable flask's threaded opening. So I designed the neck of the opening and printed it to check the compatibility with the existing cap. It worked great so I was able to design that project and move along. But I was left with a threaded tube with nothing to do! The PhLAsk is just a simple hip flash with a threaded cap. I printed it in black PLA at 220 micron layer height, three shells and 20% in-fill. I filled it with water and left it in a dish overnight and it looks like there is no seeping. The cap doesn't seal 100% but it does so well enough to keep water from dripping out with gravity. A little pressure will cause a seep though. A gasket will fix this. VIDEO: http://youtu.be/PK_BjZQtTRw I have not tested other liquids with different surface tensions but for casual liquid portability, I will be using this little guy! Bottom's up! If you like what I do and want to help me do more, please consider supporting me on my Patreon page! http://www.patreon.com/ErikJDurwoodII Thanks!