C3nderXY (Ender 3 to corexy)

Sharing of resources for ender 3 to coreXY.
Members are welcoming to share result, ask questions related, and remix the files
Ender 3 based to corexy conversion objective to repurpose of everything in ender 3 from screw to electronic. It also objective to be build by only used precut 2020 that available online that dont need precise cut to be used. Only 2 wire need to be extend. X endstop and Z motor. Others are stock length.
Design may have a little awkward implement due to reused some of the frame.
I end up 200mmx200mm of bed area can be use. running klipper.
default motor from ender estimate can hit 500 600mm/s. i successfully run print 250mm/s. you need at least volcano and better hot end.

as promises. I may not continue this project in a short time.
Feel free to remix.
-no complete BOM.
-no CAD. only from sketchup.
-not precise screw/nut/hole. need to redrill for some part.
-alot of file remix from thingiverse credit to them. i remix it.
-part is not finalize.

• reused almost everything possible from ender 3.
  -most important. check you bearing v wheel setup. this come from factory ender 3 pretty shit. v wheel and bearing can be push pull. it suppose to tight fit not moving.
  -stl file may not complete. go to skp then export.
  -some part got mesh error and need manual cut physically after print
  -idler need to reshim with washer by eye.

new screw probaly m5

m3 screw for idler

idle tooth and bearing
20T GT2 m3 toot x6
20T GT2 m3 smoothh x2

belt gt2

corner cube2020
x16

frame 2020
350mmx4
400mmx2
200MMX2
70-80MM x1

frame 2040
350mmx1

z component
12mm rod x 400mm x 2
LM12UU bearing x4

stl
mirror idler edited for 2020

color indicator

black- ori
red- buy new
green-print part

stl
-ender4 to cxy in thigiverse
-motor mount in hc300 v2

video on running 300-400mm/s with 10k accel
https://youtube.com/shorts/sT3CxJw4rjs?feature=share