VORON DIN Bracket for Meanwell UHP500-24 PSU

This is a holder / bracket for a Meanwell UHP500-24 power supply that connects to the DIN clips of the VORON Trident. (The one without the "spring" design where the screws for the clip are roughly 32mm apart)

I couldn't find this bracket or holder on any of the official repositories, so decided to create my own.

After printing I realized that the holes to mount the PSU are too large, so I attached the PSU using M4 screws and nuts. The screw length on the "lever" side of the DIN clip is 10mm, while the other side uses 14mm screws. (These holes are possibly large enough for heat inserts, but I have not tested this idea)