November 22, 2022
Description
This mount will allow you to mount a Falcon F16v3 (works on V2 as well) Expansion board to a PSU. You will need to print 4 spacers. The tolerance for the spacers is tight, they should fit inside the holes on the top of the board.
Mounting Hardware
2 M4 screws for the mount to the PSU
4 M3 screws/nuts to secure the controller to the mount.
License:
Creative Commons - Attribution - Non-Commercial
436
derikwhittaker![Resistor Box [Stackable & Customizable] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/a6/9d/ec/ab/9f/20180928_184415.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/a6/9d/ec/ab/9f/20180928_184415.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "Resistor Box [Stackable & Customizable] preview image")
