Easy PPE (personal protective equipment) holder/hook/storage for protective glasses, mask, apron,...

This easy to print PPE holder stores all your personal protective equipment: your glasses will fit on the small hook (tested with 3M® and Zekler® glasses), your mask can be hung to the "bulge", that is designed to keep stress away from the head straps keeping them intact (and round) for a longer time (tested with 3M® respirator 6500 QL - should work with full face masks, too).

The holder is strong enough (with >= 15 % infill) to even hold your (leather) apron, a jacket, or whatever else is needed to be stored in a way, that it takes up little space but should be readily available, if the work commences.

The PPE holder is designed to be screwed to a wall with three screws (two above for strength, and one below for persistence), but the huge base area gives the possibility to glue it on somewhere, if that should be necessary.

And if you don't use it for PPE, you might want this to be a place for your dog's leash and harness ... I don't know. I'm not your boss. There are many possibilities!