2.2 Beadlock RC crawler wheels 1/10 scale

Crawler beadlock wheels, can be printed in 5 parts to avoid any support material or 3 parts if supports are used. Designed for 12mm hex mounting. The hubs are screwed together with M3x10 cap heads. The hubs need to be glued to the rims if using the 5 piece build but this allows dual colours and the offset can be adjusted a little. The holes for the bolts may need drilling through 3mm and the inner hub may need a M3 tap running through or the M3 cap head may self tap depending on your printer.
Thanks
Bob