HeavyMetal - 7" Spec Racing Frame Project (Street League Approved)

HeavyMetal - Frame, by TurtleModeFPV is a purpose built 7" spec frame designed to dominate Street League Racing... Known for exceptional performance and extreme durability on the race track...

Available for purchase @ https://turtlemodefpv.com/

Pro build guide on YouTube @ https://youtube.com/playlist?list=PLET-7a65KtY3Sfx7YBgUIOEHlvP_5omIY&si=hbCg2CceoShEiSv6

Link to frame files available in product description @ https://turtlemodefpv.com/products/heavymetal-7-spec-racing-frame-street-league-approved

Follow Us On Facebook @ https://www.facebook.com/profile.php?id=100088286119947&mibextid=ZbWKwL

Important Increase wall thickness from stock slicer settings with all HeavyMetal accessories...

Recommend 1.6mm wall thickness (4x walls) with a 0.4mm nozzle and 30% gyroid infill density...

• I would not recommend printing Cable Grip with larger than 0.4mm nozzle diameter

• Pods & Arm Guards can alternately be printed with 0.6mm nozzle with 1.8mm wall thickness (3x walls) and 25 - 30% gyroid infill to achieve similar print results at reduced printing times. Pods should weight approximately 35 grams... Arm Guards should weight approximately 3grams each

• Printing HeavyMetal - Battery Armor with a 0.6mm nozzle significantly increases the weight of battery box due to the thicker infill despite reducing infill density... for this reason 0.4mm nozzle with 1.6mm (4x walls) and 30% gyroid infill is recommended to achieve approximately 80 grams finished weight..

• HeavyMetal - Battery ArmorV2.0 that has been modified to achieve a similar 80 gram weight profile while printing with a 0.6mm nozzle...

• Supports required for all components

• See my Fixed Angle Race Pod Series for more build info...

New Parts

• Big thanks to "Freedom Duck" for sharing his arm / motor vibration dampening gaskets for the HeavyMetal frame & putting in the time black box testing to verify improved vibration performance... I will also be posting the black box log photos in the near future...

• See my Fixed Angle Race Pod Series for more build info...

Frame & TPU Accessories:

• HeavyMetal - Battery Plate - (1x)
• HeavyMetal - Stack Plate - (1x)
• HeavyMetal - 7" Arms - (4x)
• HeavyMetal - Hardware Kit - (1x)
• HeavyMetal - Pod Canopy - (1x)
• HeavyMetal - 2200mAh / 3500mAh Battery Armor - (1x)
• HeavyMetal - Arm Guards - (4x)
• HeavyMetal - 10AWG / 12AWG Cable Grip - (1x)

FC Stack Recommended Build:

• Foxeer Reaper F4 Mini 60A AM32 4in1 ESC 20x20mm (NOT The Slim Version)
• Foxeer Mini F722 V4 FC 20x20mm
• Foxeer ELRS Lite 2.4G Rx SMD Ceramic Antenna (Racing)
• Happymodel ELRS 2.4G EP1 Dual TCXO RX (Long Range)
• Foxeer Predator Nano V5 Racing Camera (Analog Video)
• TBS Unify Pro32 Nano 5G8 V1.1 VTX (Analog Racing Video Set Up)
• TBS Unify Pro 5G8 V3 VTX (800mw Analog Medium Range Set Up)
• HDZero RaceV2/V3 VTX (Digital Video Racing Set Up)
• HDZeroNano90 Camera (Digital Video Racing Set Up)
• DJI-04 PRO FPV System (Digital Long Range Set Up)
• 5cm SMA to .ufl cable

Compatible Antennas:

• TruRC singularity (stubby) (Recommended)
• TBS Triumph (stubby)
• VAS Victory (stubby)
• Lumenier Micro AXII 2 (stubby)
• (DJI fits DJI OpenRacer Pods)
• 5cm SMA to .ufl cable (recommended)

Recommended Motors

• 2807 Emax E3 Series 1300kv - 1500kv or Similar